Features | Benefits |
| Has four particle size channels: 0.3μm, 0.5μm, 1.0μm and 5.0μm | Enables you to monitor the relevant sized particles in your clean areas from ISO class 9 down to ISO class 4 |
| Mass flow board | Ensures that the amount of sample air drawn in is accurate |
| Capable of producing immediate pass/fail reports for EU GMP Annex 1, FS209E (Federal Standard), ISO 14644.count data, profiles and settings | Fast and easy method of relevant data retrieval |
| Unit ID, username, location and timestamps on all printouts | Improves traceability of all samples taken |
| Colour touch screen menu | Easy and clear navigation, including touch screen QWERTY keyboard for easy entry of user data |
| Uses a filtered external exhaust dually emissions tested and certificated to pass ISO class 3. | This ensures the particle counter has minimal impact on your clean room; all CLiMET particle counters are individually emissions tested and certificated to pass ISO class 3. This ensures that the counter will not contaminate your environment |
| External exhaust port | Allows for the return of filtered exhaust air to the sampled environment (e.g. ideal for use with negative pressure isolators) |
| Lightweight and portable | Easy to handle; can be placed in most isolator hatches if necessary |
| Pharmaceutical grade 316 stainless steel enclosure designed with smooth contoured edges | Easy to clean, rugged, Faraday cage design means the sensor will not pick up 'counts' from outside electrical interference and is also unlikely to attract particles to its surface |
| Up to 5 hours continuous battery operation | Mains power not necessary for extended periods of use |
| Built in security | Allows you to control up to 4 levels the access to the particle counter using individual usernames and passwords |
| Can be calibrated to ISO 21501-4. | Ensures calibrations carried out in this way provide the highest level of accuracy |
| Built in USB interface | Connects to a USB drive to allow: Saving of stored data to USB drive, loading current settings from the USB drive and saving current settings to the USB drive |
| 'Out of Calibration' protection | Supervisor controlled function allowing the instrument to be set-up to prevent data collection if the unit is past its 'Next Calibration Due' date |
;)
ISO 9001